EXCELLENT

5.0 Average    7 Reviews

CATNIC CX150/100 EXTRA HEAVY DUTY CAVITY WALL LINTEL

Write a review

NON-STANDARD LENGTHS:

  • 900mm
  • 1050mm
  • 1200mm
  • 1800mm
  • 1950mm
  • 2400mm
  • 2550mm
  • 2700mm
  • 2850mm
  • 3300mm
  • 3600mm
  • 3900mm
  • 4200mm
  • 4575mm
  • 4800mm
  • Duplex Corrosion Protection
  • Built-in Plaster Key
  • Built-in DPC
  • Integral Insulation
Standard Lengths (mm) SWL (kN) 1:1/19:1 Weight (kg/m) Nominal height 'h' (mm)
900 - 2700 60 18.2 232
2850 - 3000 55 18.2 232
3300 - 3900 50 21.9 232
4200 - 4800 32 21.9 232

 

The SWL (safe working load) is based on the total UDL (uniform distributed load) over maximum span using 150mm end bearings.

To achieve the CH & CX loading figures indicated, lintels must be built-in as illustrated, ensuring that the blockwork infill is well-jointed during construction and compatible with the strength of the masonry above.

When using the Catnic CH and CX Open Back ranges with concrete floors, always ensure that the blockwork is built tight against the inner vertical face, and that a mortar joint is added to the top of the blockwork so that the floor units have an even spread over the inner flange of the lintel.

For the product data sheet click here

NON-STANDARD LENGTHS:

  • 900mm
  • 1050mm
  • 1200mm
  • 1800mm
  • 1950mm
  • 2400mm
  • 2550mm
  • 2700mm
  • 2850mm
  • 3300mm
  • 3600mm
  • 3900mm
  • 4200mm
  • 4575mm
  • 4800mm
  • Duplex Corrosion Protection
  • Built-in Plaster Key
  • Built-in DPC
  • Integral Insulation
Standard Lengths (mm) SWL (kN) 1:1/19:1 Weight (kg/m) Nominal height 'h' (mm)
900 - 2700 60 18.2 232
2850 - 3000 55 18.2 232
3300 - 3900 50 21.9 232
4200 - 4800 32 21.9 232

 

The SWL (safe working load) is based on the total UDL (uniform distributed load) over maximum span using 150mm end bearings.

To achieve the CH & CX loading figures indicated, lintels must be built-in as illustrated, ensuring that the blockwork infill is well-jointed during construction and compatible with the strength of the masonry above.

When using the Catnic CH and CX Open Back ranges with concrete floors, always ensure that the blockwork is built tight against the inner vertical face, and that a mortar joint is added to the top of the blockwork so that the floor units have an even spread over the inner flange of the lintel.

For the product data sheet click here

0
Projects Completed
0
Happy Customers

Can’t Find What You Are Looking For?

WE HAVE ACCESS TO THOUSANDS OF PRODUCTS

If you'd like us to give you a quote for a bigger job, or for products that you can't see on here, please complete the form. We aim to contact you within 24 hours (excluding weekends)

Alternatively call us for the most competitive prices in the industry 01895824918

0
Projects Completed
0
Happy Customers

Please provide all the information about your request. A member of our support team will respond as soon as possible.